Attic Spray Foam Insulation New Deal, TX 79350 | Lubbock Spray Foam Insulation

Spray Foam Insulation in New Deal, TX (79350) · Local Professionals

Lubbock Spray Foam Insulation · Fast response in New Deal and the Lubbock area · Free estimate 24h

✅ Written Estimates with R-Value & Thickness Specs 🛡️ Fully Insured 💸 Free Quote 24h 🕐 Mon-Sat 7am-6pm

+33Verified Reviews

17Years in Business

4.9 ★Google Rating

24/7Available

New Deal sits on the flat farm country north of Lubbock where older frame houses with thin attic insulation sit next to newer builds, and both are losing cooling dollars to the same problem: heat pouring into vented attics every summer and drafts sneaking in around gaps when the wind picks up off the plains.

Our team at Lubbock Spray Foam Insulation has been serving New Deal and the surrounding areas since 2009. We know the housing stock here, the way summer heat bakes through settled insulation, and the dust storms that find every gap in a wall cavity. When your electricity bill climbs or a back bedroom won't cool, we show up with a free on-site assessment and an honest estimate with R-value and thickness spelled out in writing.

Spray Foam Insulation in New Deal (79350)

New Deal's housing mix tells the story. Older frame houses with original fiberglass batts that have settled thin over decades sit alongside newer slab-on-grade homes built with HVAC ductwork routed through vented attics. Both types face the same West Texas challenge: when summer temperatures climb toward or above 100 degrees, those attics turn into ovens. The ductwork loses conditioned air to the heat, and your cooling system runs harder and longer. Winter brings its own problem. Cold snaps send drafts through gaps around windows, doors, and the top plates of exterior walls, especially after a dust storm has worked its way into every cavity.

Spray foam insulation and air sealing solve both problems. Closed cell foam creates a sealed, rigid shell that stops heat gain in summer and air leakage in winter. Open cell foam is less dense and costs less, and it works well when you need to fill cavities and seal gaps without the extra rigidity. We help you choose the right approach for your home and your budget. Since 2009, we have removed old insulation, sprayed attics, sealed rim joists and band joists, injected foam into closed walls, and air-sealed crawl spaces across New Deal and Lubbock County.

Our services in New Deal

Attic Spray Foam Insulation in New Deal · Lubbock summer heat pushes vented attics well past 100 degrees…
Closed Cell Spray Foam Insulation in New Deal · Closed cell foam adds rigid insulation that holds up well in Lubbock's dry…
Open Cell Spray Foam Insulation in New Deal · Open cell foam expands to fill cavities…
Wall & Injection Foam Insulation in New Deal · Brick ranches across central Lubbock often have wall cavities never insulated…
Crawl Space Spray Foam Insulation in New Deal · Most Lubbock homes sit on a slab…
Rim Joist & Band Joist Spray Foam in New Deal · Rim joists in Lubbock homes let wind-driven dust and winter drafts straight…
Garage Spray Foam Insulation in New Deal · Garages attached to Lubbock brick ranches and newer subdivisions take the brunt…
Metal Building & Barndominium Spray Foam in New Deal · Cotton country around Idalou and Slaton is full of metal shops and…
Commercial & New Construction Spray Foam in New Deal · New subdivisions keep expanding south and west toward Wolfforth as Lubbock…
Insulation Removal in New Deal · Old attic insulation in Lubbock's brick ranches has often settled thin after…
Insulation Replacement & Re-Insulation in New Deal · Thin original insulation is common in Lubbock's brick ranches…
Air Sealing in New Deal · Wind-driven dust finds every gap around windows, doors…

How a Job Works in New Deal

We start with a free on-site assessment. You call us at (806) 853-5452 or request an estimate online, and we come to your home in New Deal to see what you have, what has to come out, and what the space actually needs. We measure the area, check access, and look for any moisture or damage that has to be fixed before any foam goes in. We write it all down in a detailed estimate with R-value and thickness specs so you know exactly what you are getting.

On the day of the work, our fully insured crew arrives with the equipment and materials. If old insulation has to come out first, we remove it and haul it away. Then we spray the foam to the thickness and density your estimate calls for, controlling the application so the material sets up correctly. We use mechanical ventilation during the cure to manage odor, and we give you a clear re-entry window, typically twenty-four to forty-eight hours, so you know when your family and pets can safely return to the space. If your home is occupied during the work, we coordinate around your schedule.

Once the foam has cured, we do a final walkthrough with you, answer any questions, and leave your property clean. You are left with a sealed, insulated space that will hold its R-value for decades.

Pricing for spray foam insulation in New Deal depends on the area you want to cover, the R-value and thickness you need, the type of foam (open or closed cell), and whether old insulation has to be removed first. An attic spray foam job typically starts at $1.50 per square foot. Wall injection foam runs around $2 per square foot. Crawl space foam starts at $2,500 for a basic job. Rim joist and band joist sealing starts at $650. If you need old insulation removed and replaced, expect to start at $2,800 depending on the size and access. Open cell foam is more affordable, starting at $0.55 per board foot, while closed cell runs from $1.20 per board foot and offers higher R-value in less thickness. The real cost drivers are the square footage or board footage, the R-value you need, whether access is tight, and what has to come out first. We give you a free written estimate at (806) 853-5452 so you know the exact cost before we start.

✅ Written Estimates with R-Value & Thickness Specs, fully insured for work in New Deal and nearby areas.

Why do older frame houses in New Deal lose so much cooling in summer?

Older frame houses in New Deal were built with fiberglass batts in the attic, usually 3 to 6 inches thick. Over decades, fiberglass settles and compacts, losing R-value. Meanwhile, the attic is vented, so outside air at 110 degrees flows freely above the insulation and heats the ductwork running through it. Your air conditioning system has to cool that ductwork as well as the house, so your cooling bills spike. Spray foam seals the attic and stops the heat gain at the roof deck instead of trying to fight it from below.

What if there is moisture or old insulation in the attic before we spray?

We inspect for moisture, leaks, and contamination before any foam goes in. If the substrate is wet, damp, or dirty, we do not spray over it. We tell you what has to be fixed first, whether that is a roof leak, a plumbing issue, or old insulation that needs to come out. We fix the moisture problem or we walk away. That is not a caveat, it is how we protect your investment. Call us at (806) 853-5452 to discuss your specific situation.

How much does it cost to spray foam an attic in New Deal?

An attic spray foam job in New Deal typically starts at $1.50 per square foot for open cell foam and runs higher for closed cell, which is denser and offers more R-value per inch. A 1,500 square foot attic at $1.50 per square foot would be around $2,250 for open cell as a ballpark. Closed cell costs more but gives you higher R-value in less thickness, which matters if your attic is tight. The final price depends on the thickness and R-value you need, whether old insulation has to come out, and how easy access is. We give you a firm written estimate after the on-site visit at no charge.

Who decides the R-value and thickness for spray foam in New Deal, and who inspects the work?

The energy and building code that applies in New Deal sets the minimum R-value for attics and walls. The building official in New Deal enforces that code and may require a permit and inspection. We help you understand what applies at your address and coordinate with the city, but the building official has the final say on what is required and whether the work passes inspection. Permits and contractor registration rules vary by city across Greater Lubbock, so always confirm with the New Deal building department what applies to your project before we start.

Can we stay in the house during the spray foam work?

Yes, you can stay in your home during the work. We use mechanical ventilation during the cure to manage odor. The foam has a smell while it is curing, and we recommend opening windows in other parts of the house and keeping the space we are working in well ventilated. We give you a clear re-entry window, typically twenty-four to forty-eight hours, before you should occupy the sprayed space. If you have young children or pets, plan accordingly. We coordinate the work schedule with you so the timing works for your household.

Are you fully insured for spray foam work in New Deal?

Yes, we are fully insured with general liability and workers' compensation coverage. Before you hire any spray foam contractor, ask for proof of insurance and verify the coverage is current. We are happy to provide our insurance details. When you call us at (806) 853-5452 for an estimate, we can answer any questions about our coverage.

When is the best time to spray foam an attic in New Deal?

Spring and fall are ideal in New Deal because the weather is mild and you can open windows for ventilation during the cure without losing heating or cooling. Summer is possible but harder because the heat makes the cure process more aggressive and you may have to run air conditioning while the space vents. Winter is the worst time because you cannot open windows to manage odor and ventilation without losing heat. If your cooling bills are already climbing in June or July, fall is the best window to plan the work so you get the benefit starting the next summer season.